Drive up to 3 Servomotors using DTMF control
Our DTMF servo driver kit can drive up to three Servo Motors under DTMF tone control. Servo motor 1 can be set to six different positions
Servo motors 2 and 3 can be moved from one end position to the other, again under DTMF control
The video below shows the DTMF Servo kit in action
The PCB is a high quality double sided PTH (plated through hole) 1.6mm FR4 (Fiberglass) board 64 x 38mm in size.A 4 pin programming header is also provided to allow in-circuit re-programming of the PIC
A compact Gold Plated PCB, components and programmed PIC. See the PDF for instruction details and component list.
The Servomotors are optional as many different types are available. Up to three can be used with this kit
and the operation can be seen in the video. The Servomotors in the video are miniature type MG90S
available below.
MG90S servo, Metal gear with one bearing
Weight: 13.4g
Dimension: 22.8*12.2*28.5mm
Stall torque: 1.8kg/cm(4.8V )2.2kg/cm(6V)
Operating speed: 0.1sec/60degree(4.8v), 0.08sec/60degree(6v)
Operating voltage: 4.8-6.0V
Dead band width: 5us
Connections Red +5V, Brown 0V, Orange control. (MG90S only – check data sheet if other servo’s used)
all servos come with an arm set.
![pdf_symbol[1]](https://www.cstech.co.uk/wp-content/uploads/2013/10/pdf_symbol1.gif){kind=small}
![pdf_symbol[1]](https://cstech.co.uk/wp-content/uploads/2013/10/pdf_symbol1.gif){kind=small}
